Kubota CD1001 Series

Kubota CD1001 Series

The Kubota CD1001 Series Compact Disc is designed for shallower operation at up to 10 cm working depth. It’s 15% lighter than the CD2001, and thus easier to lift, which is economical and ideal for reducing soil compaction. The CD1001 is available in working widths from 2 m to 3.5 m and equipped with a disc arm ready to receive the 520 x 5 mm heat-treated conical disc without lateral movement during work for consistent cutting quality.

The Advantages

• 15% lighter – easy to lift, reducing soil compaction.
• Strong frame design.
• Constant cutting quality due to little lateral movement of the disc arm.
• Heat-treated disc of 520x5mm (hardness 200kg/mm²).
• Well protected maintenance-free disc hub for a long life time under large pressure at high working speed.
• User-friendly settings.
• Nice leveling and controlled soil flow.
• Can be combined with the integrated pneumatic seeder SH200 or SH500 for establishing cover crops or grass in one pass during stubble cultivation.
• Multiple roller options to choose from.

Sturdy Frame and Reinforced Headstock

• Extremely sturdy – the CD1000 series is fitted with a frame well-proven with the Kubota cultivator range.
• Reinforced headstock and a frame size of 100 x 100 x 8 mm, the CD1000 series can be equipped with the heaviest roller.
• The brackets of the roller are fixed at the front bar of the frame for a better weight transfer during road transport and also at higher driving speeds.
• Due to the small distance between the disc sections, the CD1000 series requires reduced lifting capacity.
• The working depth is easily adjusted by spacers situated at the height adjustment rod.
• The lateral deflectors are folded to keep the transport width in line with road traffic regulations.

Maintenance-Free Bearings

• Each angled arm is fitted with a large maintenance-free double ball bearing and 35 mm axle. This high-quality bearing is able to carry heavy radial and axial loads.
• Special protection on the side of the arm is achieved by a special seal of 5 sealing lips and by the joint protecting the bearing.
• On the other side the disc is protected against dust by an O-ring.
• The disc hub is fixed onto the arm by a bolt and special washers that prevent any loosening. The bolt is protected against soil by its position inside the arm.

Perfect cutting Quality

• The upper part of the arm is fitted with special brackets to avoid any lateral movement: the cutting angle is fixed to ensure an optimum cutting quality even under the driest conditions.
• The rear disc section operates offset to the front unit to provide optimum performance and trash incorporation.
• A rubber shock system adjusted to the size of the disc and working speed.
• The maintenance free arms are mounted between rubber buffers to absorb any shock loads from contact with unforeseen obstacles.
• The notched discs improve its penetration and rotation irrespective of any plant residues.

Rear Rollers

• According to the soil specifications, the consolidation required, the mixing of the soil and straw, the surface of the soil requested and the lifting capacity available, Kubota offers a choice of rear rollers.
• Cage roller Ø 550mm – 90kg/m.
• Actipack roller Ø 560mm – 220 kg/m: heavier, for clod crushing and very firm recompaction of the soil. Adapted also for heavy and sticky soil conditions.